O Installation Guide - Panasonic CQ-DF202U Operating Instructions Manual

8 20-020
22
Installation Guide
AN WARNING
This installation information is designed for experienced installers and is not in-
tended for non-technical individuals. It does not contain warnings or cautions of po-
tential dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than qualified in-
staller could cause damage to the electrical system and could result in serious per-
sonal injury or death.
O Installation Hardware
No | Mem | Diagram | ay
a Mounting collar SF
@) | Tapping screw 1
2 (5 mmx 16 mm) $
A Mounting bolt (5 mm)
SY
Removable face plate case ©
SSL]
O Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps:
(Please refer to the "WARNING" statement
above.)
e Identify and label the car wires.
e Connect the car wires to the wires of the power
connector.
e Install the unit in the dashboard.
e Check the operation of the unit.
|
If you encounter problems, please consult your
nearest professional installer.
Caution:
eThis unit operates with a 12 V DC negative
ground auto battery system only. Do not at-
tempt to use it in any other system. Doing so
could cause serious damage.
Before you begin installation, look for the items
which are packed with your unit.
e Warranty Card...Fill this out promptly.
e Panasonic Servicenter List for Service Directory
...Keep for future reference in case the product
needs servicing.
e Installation Hardware...Needed for in-dash in-
Stallation.
O Required Tools
You'll need a screwdriver, a 1.5 V AA battery, and
the following:
12V DC Electrical Side-cut
Test bulb tape pliers
Nes
C Dashboard Specifications
Thickness
Min. 6" (4.75 mm)
—||— Max. 42" (5.56 mm)
Eu | a (53 mm)
Ta" não A