O Installation Guide - Panasonic CQ-DF402U Operating Instructions Manual

Installation Guide
PA WARNING
tended for non-technical individuals. It does not contain warnings or cautions of po-
tential dangers involved in attempting to install this product.
sonal injury or death.
O Installation Hardware
CE
Mounting collar SI
+ Rear support strap PAN
Tapping screw
(5 mm@ x16 mm)
hi Mounting bolt (5 mm) rau
@ | Removable face plate
case
Fée Gr
R A Overview |
This product should be instailed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps:
(Please refer to the "WARNING" statement
above.)
o Identify and label the car wires.
o Connect the car wires to the wires of the power
connector.
o install the unit in the dashboard.
o Check the operation of the unit.
Hex. nut (5 mme)
If you encounter problems, please consult your
nearest professional installer.
Caution:
oThis unit operates with a 12 V DC negative
ground auto battery system only. Do not at-
tempt to use it in any other system. Doing so
could cause serious damage.
Before you begin installation, look for the items
which are packed with your unit.
o Warranty Card...Fill this out promptly.
© Panasonic Servicenter for Service Directory
...Keep for future reference in case the product
needs servicing.
o Installation Hardware...Needed for in-dash in-
Stallation.
A Required Tools
You'll need a screwdriver, a 1.5 V AA battery, and
the following:
12V DC Electrical Side-cut
Test bulb tape pliers
Les
O Dashboard Specifications
Thickness
Min. 346" (4.75 mm)
—||— Max. 2" (5.56 mm)
| 2257 (53 mm)
7322" (182 mm)
CO-DE402/DEX302U
S 20-r
19