Table of Contents
Advertisement
OFF position: the phototrap must be switched off when transporting
the phototrap, changing the MicroSD card or batteries. Remove the
batteries if the camera is to be turned off and stored for an extended
period of time.
6.2 SETUP mode - Settings
Offer
Mode
Photo resolution
Number of photos
Video resolution
Video resolution
Sound recording
Shutter delay
Motion detector
sensitivity
Target
recording time
Formatting a
memory card
18
Parameters and description
Photo / Video / Photo and video
20 mpx (6144×3456 px), 16 mpx (5376×3024 px),
12 mpx (4608×2592 px), 8 mpx (3840×2160 px),
5 mpx (3027×1728 px), 3 mpx (2304×1296 px),
1 mpx (1280×720 px)
Select the number of photos taken each time
the phototrap is activated (1, 2 or 3).
If photo+video is selected, only 1 photo will
be taken.
High: 1920×1080 px, Medium: 1280×720 px,
Low: 720×480 px, Very Low: 640×480 px
3 seconds - 10 minutes
ON/OFF
Adjustable from 5 s to 60 min. Selects how long
the phototrap will „wait" between each image.
This prevents taking too many pictures that
could overload the memory card capacity.
Low / Medium / High. Medium mode
is recommended. Sensor sensitivity is
temperature dependent. The higher the
ambient temperature, the lower the sensitivity.
ON/OFF - sets the operating time - after
activation and leaving the phototrap in the ON
mode, the phototrap automatically turns on
and off at the programmed times.
YES/NO - Select YES to delete all photos and
videos from the card.
Advertisement
Table of Contents
