Table of Contents
Advertisement
5
PREPARATION PHOTOPASTES
5.1 Installing batteries
The d-guard 940 is powered by a 6V DC adapter (not included) or
4/8× 1.5V AA batteries (not included). For longer operating life, it is
recommended to use 8 batteries.
You can use the following types of 1.5V batteries:
we recommend using high capacity alkaline batteries
rechargeable lithium batteries
rechargeable NiMH battery
5.2 Installing a MicroSD memory card
The d-guard 940 is equipped with a MicroSD memory card slot up to
32 GB (not included). Make sure the ON/SETUP/OFF switch is in the OFF
position before inserting or removing the MicroSD memory card. The
MicroSD card must be empty, i.e. no images from other devices. If the
MicroSD card has previously been used in other devices, format it
before using it from this camera or a computer. Many MicroSD cards
formatted from other cameras have poor compatibility with different
brands of cameras. If the card is new, you can use it without formatting.
Before inserting a MicroSD card, you must disable write protection on
the card itself, otherwise the phototrap will not function properly. After
performing the above steps, open the cover of the photo trap and insert
the MicroSD memory card all the way into the slot according to the
orientation indicated by the icon engraved next to the slot.
6
SWITCHING ON/OFF PHOTOTRAP
6.1 Switch ON/SETUP/OFF
The ON/SETUP/OFF switch has three possible positions:
Position ON: In this position, the phototrap automatically takes
photos and records videos when the motion detector is triggered.
SETUP position: in this position you can use the MENU button to
access the functions listed in the table on this page.
17
Advertisement
Table of Contents
