How To Use The Hand Blender/ Whisk Attachment; How To Use The Chopper - Westinghouse WKHBSE36WH Instructions Manual

HOW TO USE THE HAND BLENDER/ WHISK ATTACHMENT

WARNING Cut Hazard. Always inspect attachments before each use. Do not use
cracked, bent, or damaged attachments.
• The hand blender is not designed for use over a heat source.
• This appliance is not intended to chop ice. Add ice to beverage after blending.
• Do not immerse the motor housing past the top metal portion of each blending
attachment.
1. Place food in the beaker for blending. For best results, solid foods should be no
larger than 1-inch (2.5-cm) chunks.
2. Attach blending or whisk attachment to motor housing. Hold hand blender upright
and turn motor housing clockwise to tighten and counterclockwise to loosen while
holding the attachment.
3. Plug into outlet.
4. Grasp unit in hand. Push speed control button. Slowly move the attachment up,
down, and sideways through the food.
5. Do not immerse the motor housing past the top metal portion of each blending
attachment.
6. Unplug from outlet when not in use.

HOW TO USE THE CHOPPER

1. Place chopping blade into bowl, ensuring blade is seated securely. Put food into
chopper bowl and place the motor housing on top, lining up the plastic notches.
Twist clockwise to locked position.
2. Choose desired chopping speed (I or II) and process until food has reached
desired consistency. Running the chopper continuously will yield smoother food
consistency, while pulsing will yield chunkier results.
3. The rubber lid/base may also be used as a nonskid base under the chopper while in
use.
4. Remove motor housing from chopper and food from chopping bowl. Unplug from
outlet when finished.
7
EN