Sony CMT-HP7 Operating Instructions Manual page 7

[] For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system's
VOLTAGE SELECTOR for available
settings.
[] Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press I/d), the system tur_s on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Inserting two R6 (size AA)
batteries into the remote
Attaching the speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Front speaker (heft (4)?Right (4))
U
When carrying this system
Perform the following proeedure to protect
the CD mechanism.
1
Make sure that all discs are removed
from the system.
2 Press I/_ to turn offthe system.
"STANDBY" flashes for a few seconds,
and then disappears from the display.
3 Unplug the power cord.
6")
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last tbr about six
montlls. When the i_emoteno longer operates the
system, replace both batteries with new ones.
7GB