Using Your Headset.9-10; Answering A Call.9; Answering A Call When Listening To Stereo Audio.9; Ending A Call.9 - i. Tech Dynamic Clip S38 User Manual

Pairing Your Headset
1. Place the headset ahd the mobile hahdset where they are easily
viewable and no more than 1 meter apart.
2. Ensure the headset is turned OFF.
3. Press and hold the MFB until the headset led alternately flashes blue
and red.
4. Activate your mobile handset's Bluetooth function by referring to
your mobile handset user guide for details.
5. Set the mobile handset to search for Bluetooth devices within a i
meter range as instructed in the mobile handset user guide and
select "i.Tech Clip S38" from the list.
6. Enter the preprogrammed passkey "BBSS " and press "OK" to pair your
headset and mobile handset. When the pairing is complete, the
headset led will flash blue rapidly 5 times followed by a long beep.
7. Go back to your mobile handset's main menu. For certain mobile
handset models, a headset icon will be shown on the screen. You
should now be able to make and receive calls using your headset.
IMPORTANT If the pairing cannot be completed within 2 minutes whilst
the pairing mode is activated, the headset LED will flash purple red, and
beeps 3 times follawed by a oing beep before svitching off. Please
repeat Steps 2 to 7 to pair the headset and the mobile handset again.
Using Your Headset
Answering a Call
When there is an incoming call, you will hear ringing through the
earphone and the built-in buzzer. Press the MFB to accept the call or
ahswer the call via your mobile handset in the normal way.
If you want to stop the buzzer from ringing, press the Volume Key once.
YOU now only hear the ringing tone through the earphohe.
Answering a Call when Listening to Stereo Audio
Press the MFB once to answer the caii and when finished, press the MFB
once again to resume stereo audio.
If the other party you are speaking to ends the call, stereo audio will
automatically resume without having to press the MFB.
NOTE TO receive stereo audio from your mobile handset or pda, please
make sure they support the Bluetooth A2DP profile.
Ending a Call
Press the mfb to ehd your call or end the call via your mobile handset in
the normal way.
Rejecting a call
To reject an incoming call, press and hold the Volume Key for 2 seconds
until you hear 2 beeps.
Dialing from Your Mobile Flandset
Simply make calls on your mobile handset in the normal way.