Mode Display Button; Macro Button - Vivitar Vivicam 3330 Quick Start Manual

3-8 Mode Display Button

1.This button is only working in the Record Mode. Press this
button you can change the LCD monitor to several displays.
Standard Full Display
Only Operation Settings
2. Press the "Mode Display Button" to enter the "Play Mode" to
view the images when the camera is power off.
3.In the Record Mode, the camera will be auto power off cause
of the power saving function. You can press the "Mode Display
Button" to turn on the camera again.

3-9 Macro Button

●Slide down and up the Macro button at the side of camera
to switch between Basic and Macro modes. When you
selected the Macro mode, the green LED located on the top
of the LCD monitor will be on.
Basic
Macro
Image Only LCD Monitor Off
Standard
※If you selected the Macro Mode when using the camera, the
flash off function will be enabled automatically.
10