Table of Contents
Advertisement
Installation Section
Fit the supplied connector on the pipe union
Make sure the power supply corresponds to the voltage and frequency indicated on the vacuum cleaner
plate.
Warning!
Do not fit the plug in the power socket with wet hands.
In the event of an extension being used, make sure this is in perfect condition, in compliance with CE
standards and with cable cross section suitable for the power input of the vacuum cleaner.
If, when the vacuum cleaner is switched on, the inlet blows air out instead of sucking it in, the machine will
have to be switched off, the plug detached from the power socket and the direction of rotation of the
motor changed by modifying the plug using a screwdriver.
www.kruger.es
Advertisement
Table of Contents
