Setting Image Resolution And Quality - Vivitar DVR-510 User Manual

Setting Image Resolution and Quality

As you get to know the DVR-510, you can set the image resolution (number of vertical and horizontal pixels)
and image quality (compression ratio) based on the types of images you want to shoot. These settings affect
the number of images that can be stored in memory, or on a memory card.
Higher resolution and higher quality images provide finer detail but cause the images file size to be larger.
To change image resolution or image quality, perform these steps below:
1. Turn on the power by pressing and holding the
2. Toggle the button to access in camera or movie mode, then press
the button.
The CAPTURE / MOVIE MENU is displayed.
3. Select [SIZE] with the zoom lever, and press the
4. Select the desired setting with the zoom lever, and press the
5. Follow the same steps 3 and 4 to set the [QUALITY].
The possible number of shots and recording time depend on the storage size, resolution and quality settings and the
subject of the image to be captured.
EN-22
button.
button.
button.
MOVIE MENU
CAPTURE MENU