Long Exposure At "B" Setting - Minolta X-300S Instruction Manual

Hide thumbs Also See for X-300S:
Table of Contents

Advertisement

There are two ways to do th is:
. First set the shutter speed selector
at the desired click-stop, then
turn the aperture ring until no
LEDs light up other than the LED
blinking next to the selected
speed
.
• First set the aperture as desired,
then turn the shutter-speed selec-
tor so that the blinking LED
matches up
with the glowing
LED
.
If two LEDs are glowing,
adjust the aperture ring slightly so
only one glows. Do not set the
shutter
speed between click-stops.
Long exposure at "S" setting
When the mode/shutter-speed
se-
lector is set at
"S",
the shutter will
open when you press the shutter-
release button and remain open
until you release the button
.
This
makes exposure longer than one
second
possible.
A tripod or other
firm support should generally be
used.
The eyepiece cap (p
.
22) should be
used to prevent stray light from
affecting the exposure.
NOTE
• The self-timer does not operate at
the
"
S" setting.
• With fresh batteries at moderate
temperatures, the maximum long
exposure is approx
.
10 hours. At
lower temperatures, exposure time
may
be
sh orter.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

X-370n

Table of Contents