Download Print this page

easiTrack TF Asset Installation

Installation of TF_Asset GPS Tracker

This installation guide is for the GPS TF_Asset tracker we offer; it is intended to serve as a

walkthrough on how to successfully install your TF_Asset GPS Tracker Device.

TLP1-SF obtains energy through direct sunlight to maintain working. During installation, make

sure that the device can be exposed to direct sunlight every day, otherwise the device

battery may not be charged, which will cause the device to shut down. If the device is not

charged for more than three months, it may cause permanent damage to the internal

battery. Before installation, we recommend fully charge the device with a USB charging

cable.

Note: Indicator lights will go out automatically after the tracker turns on for 70 seconds without

connecting to the external power via USB cable.

EASITRACK

Table of Contents

Do you have a question about the TF Asset and is the answer not in the manual?

Page 1 Before installation, we recommend fully charge the device with a USB charging cable. Note: Indicator lights will go out automatically after the tracker turns on for 70 seconds without connecting to the external power via USB cable. EASITRACK...
Page 2 Your installation is now complete. *** PLEASE READ **** * EasiTrack makes information available on its web site to enhance customer knowledge and promote a better understanding of the hardware and its setup and configuration. When applicable, EasiTrack...