Table of Contents
Advertisement
==;
0:00.00
R 0:30
>
sP
ve
73
=.
M0:00.00
SP
@ Changing the Tape Counter indication
By changing the setting for [DISPLAY] on the [OTHER
FUNCTIONS] Sub-Menu of the [VCR FUNCTIONS] or the
[CAMERA FUNCTIONS] Main-Menu, the Counter Display
Mode can be changed in the order shown in the above
illustrations @-Q@.
Camera Mode (@)
(1) ALL:
Elapsed Tape Time Indication (initial setting)
(2) MEMORY:
Memory Stop Indication and Elapsed Tape
Time Indication (-> 74)
© PARTIAL: No Counter Indication
Only a few indications are displayed so that all parts of the
picture can be seen clearly, However, when you turn on
the Movie Camera, all indications initially appear for a few
seconds to inform you of the selected settings.
@\n this condition, if you switch the Movie Camera over to
the VCR Mode and then back to the Camera Mode, [ALL]
is automatically selected for the Tape Counter Indication.
@ OFF:
No Counter indication
In this mode, only the Operation Mode Indications and
Warning/Alarm Indications can appear. However, when
turning on the Movie Camera, all indications appear for a
few seconds to inform you of the selected settings.
VCR Mode
@ ALL:
Elapsed Tape Time Indication (initial setting)
6 MEMORY:
Memory Stop Indication and Elapsed Tape
Time Indication (> 74)
© ofr:
No Counter Indication
In this mode, only the Operation Mode Indications and
Warning/Alarm indications can appear.
Advertisement
Table of Contents
