Vitek VT-710S Product Manual
Vitek VT-710S Product Manual

Vitek VT-710S Product Manual

Video door phone

Advertisement

Quick Links

Warranty and Service Information

LIMITED LIABILITY WARRANTY
Your new Video Intercom System is guaranteed free defects in
materials and workmanship for a period of one your from the
date of purchase.
The product must have been used only for its intended purpose,
and not been subjected to damage by misuse, willful or
accidental damage, caused by excessive voltage
or lightning.
The system must have been installed in accordance with the
instructions given in the instruction manual and only
compatible equipment may be connected to it.
The product must not have been tampered with in any way then
the guarantee will be considered null and void.
Should the serial numbers be tampered with in any way then
the guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact VITEK directly for all servicing.
9970 GLENOAKS BLVD. UNIT B SUN VALLEY, CA 91352
PHONE: 888-VITEK-70 / 818-771-0300 FAX: 818-771-0400
WWW.VITEKCCTV.COM | SALES@VITEKCCTV.COM
8
Video Door Phone
Product Manual
VT-710S
Thank you for purchasing the VT-710S Video
Door Phone from VITEK Industrial Video Products,
Inc. It's imperative that this manual is read prior to
installation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VT-710S and is the answer not in the manual?

Questions and answers

Summary of Contents for Vitek VT-710S

  • Page 1 PHONE: 888-VITEK-70 / 818-771-0300 FAX: 818-771-0400 WWW.VITEKCCTV.COM | SALES@VITEKCCTV.COM Video Door Phone Product Manual VT-710S Thank you for purchasing the VT-710S Video Door Phone from VITEK Industrial Video Products, Inc. It’s imperative that this manual is read prior to installation.
  • Page 2 2. Only use DC Power Supply 11. Only use attachment/accessories specified by VITEK. 3. Read & Keep these instructions. 12. Use only with cart, stand, tripod, 4. Heed to all warnings and follow all bracket, or table specified by the instructions carefully.
  • Page 3 CAMERA INSTALLATION Surface Mount Installation Tilt Holder • Proper installtion height should be determined at user’s discresion. • The recomended height for camera installation is 5’ from the ground. • To allow for greater flexability a TILT holder is supplied. Normel Upper View...
  • Page 4 Included Components Indoor Monitor Handset Switch Contrast Volume Speaker AC Power Input Outdoor Camera Microphone Surface Mount Bracket Mounting Hardware Flush Mount Bracket When installing this video intercom system take care to connect the cables as follows: 1. Peel back the grey outer covering of the cable to expose the Red and White wires, strip Monitor Screen Wall...

Table of Contents