Communications/Serial I/O Map 0830·1 - IBM 5100 Maintenance Analysis Procedures

(
(
COMMUNICATIONS/SERIAL I/O MAP
PAGE 1 OF 1
ENTRY POINTS
FROM
ENTER THIS MAP
MAP
NUMBER
ENTRY
POINT
PAGE
NUMBER
STEP
NUMBER
0200
A
001
001
(Entry Point A)
This is the entry MAP for the communications
adapter / serial I/O adapter. If the PROCESS
CHECK light is on. the communications/serial
I/O MDI cannot be loaded.
Is the PROCESS CHECK light on1
Y N
002
Use the keys on the numeric section of the
keyboard:
-Hold CMD and press HOLD
-Hold CMD and press - (minus)
-For BASIC. hold CMD and press
*
(multiply)
-For APL. hold CMD and press x (multiply)
-Press C
-Hold CMD and press 1
-Press EXECUTE
Follow the instructions on the display until
DCP2 MENU appears. Then:
{ -Enter 820
-Press EXECUTE
The communications/serial I/O MDI should
now load and run. Follow the instructions on
the display. When completed. return to the
BASIC/APL mode by pressing RESTART.
003
Go to MAP .0420, Entry Point A.
COPYRIGHT IBM CORP 1975
EXIT POINTS
EXIT THIS MAP
PAGE
NUMBER
1
STEP
NUMBER
003
TO
MAP
NUMBER
0420
12DEC75
MAP 0830-1
ENTRY
POINT
A
PN 1608394
EC 829523 PEC 828851
MAP 0830-1
•