Energizer EZPV20V2A User Manual page 13

4.4 SWITCH LOCK
The switch trigger can be locked in the center position.

This helps to reduce the possibility of accidental starting when not in use. To lock the switch trigger, place

the direction of rotation selector in the center position.
4.5 DIRECTION OF ROTATION
Direction of rotation is controlled by the direction of rotation selector located above the switch trigger.
4.6 CLOCKWISE ROTATION
Right: To select forward rotation, release the on/off switch and push the forward/reverse lever to the left
side of the tool.
4.7 ANTICLOCKWISE ROTATION
Left: To select reverse rotation, push the lever to the right side of the tool.
4.8 VARIABLE SPEED
This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure.

Speed is controlled by the amount of switch trigger depression.

4.9 ADJUSTING THE TORQUE
The torque is adjusted by rotating the torque setting ring; the torque is greater when the torque setting is

set on a higher position. The torque is less when the torque setting ring is set on a low position"1"denotes
lowest and "21" denote highest.
Torque is set by means of a torque setting according to different screw and different material, you can

adjust suitable torque, if the screw is long and material is hard, you can adjust the bigger setting.
4.10 FUNCTION MODE SELECTOR
Turn the function mode selector and let the pointer align to the drill mode

action.
Turn the function mode selector and let the pointer align to the screwdriver mode

screwdriver mode of action.
4.11 SPEED SELECTOR
The drill has a two-speed gear train designed for drilling at 1 (LOW) or 2 (HIGH) speed.
A gear selector is located on top of the drill to select either low or high speed.
When you push the button forward and select low speed range, the speed will decrease but will provide
more power and torque. When using drill in the high-speed range. Speed will increase but will provide
less power and torque. Use low speed for high power and torque application and high speed for fast
drilling applications.
IMPORTANT: never adjust this two-speed selector whilst the drill is running. Always let it come
to a complete stop first.
4.12 LED LIGHT
The LED work-light can light prior to motor running if you press the switch lightly, which keep the work
area to be lighted for checking clearly at first, and it lights also during your operation.
1313
that selects the drill mode of
that selects the