Operation - Energizer EZPV20V2A User Manual

2) Keyless chuck (1)
Your drill has a keyless chuck that allows you to hand tighten or release drill bit in the chuck jaws.
3) Torque adjustment ring (2)
The drill has a torque adjustment ring. It allows you to select the desired torque depending on the task you
have to perform (screwing/different types of screws into different materials). The proper setting depends on
the type of material and the size of screw you are using.
4) Forward/reverse selector (right/left rotation selector) (6)
The drill has a forward/reverse selector located above the switch trigger.
CAUTION: To prevent damage to the gearbox, always allow the chuck to come to a complete stop
before changing the direction of rotation or selecting another speed (HI-LO). To stop, release the trigger
switch.
5) Variable speed
Your cordless drill has a variable speed switch. The rotational speed and torque will indecrease equivalently
to applied trigger pressure. This drill has an electric brake, when the trigger switch is released, the chuck
stops turning.
6) Speed selector (3)
Your cordless drill has a two-speed gear, designed for drilling or driving at LO (1) or HI (2) speed. A slide
switch is located on top of your drill to select either LO (1) or HI (2) speed.
7) LED light (7)
Your cordless drill is equipped with an LED light at the front, above the battery pack.
8) TPR soft grip
Your cordless drill is equipped with TPR soft grip and protective parts. TPR (Thermoplastic rubber) is elastic,
chock absorbing and environmental friendly (recyclable).

4. OPERATION

4.1 CHARGING THE BATTERY PACK
IMPORTANT: The battery pack is not fully charged at the factory. Before attempting to charge
them, thoroughly read all of the safety instructions.
Assure that the charger you are using matches your battery pack.

Insert the charger into 220-240V~, 50-60Hz outlet. The indicator light (13) will turn red to show

the power is connected.
Insert the battery(5) into the slot of charger(12). Make sure the contact with the charger is correct.

The indicator light (13) become to green and flash when charging.

When fully charged The indicator light (13) become green.

1111