Table of Contents
Advertisement
I
CONNECTIONS
I
Connection
to an Audio
System
Connecting
to an
Audio
System
(2 Channel
Amplifier,
Analog)
1
Using the audio cables, connect the (LINE)
AUDIO [red and white) OUT jacks on the rear of
the DVD-VCR to the AUDIO (red and white) iN
jacks of the Amplifier.
2
Using the video signal cable/sL connect the
VIDEO or COMPONENT OUT jacKs on the rear
of the DVD-VCR to the VIDEO or COMPONENT
IN jack of your TV as described on pages 14 to
18.
3
Turn on the DVD-VCR.TV, and Amplifier.
v_EOl RrAUD°_
I®_ _ Ii_'I
I® ® ®I_=T'I
1 d'oo 'e
Stereo Amp.
4
Press the input select button of the Amplifier to
select the External input in order to hear sound
from the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input
Notes
Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause
damage
to the speakers and your ears.
Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53)
- The position of jacks may vary depending on the Amplifier.
Please refer to your Amplifier's user manual.
- You can also connect the amplifier using theAUDlO
OUT (red and white)jacks
from the DVD-VCR.
ENG-19
Advertisement
Table of Contents
