Loading Time; Cleaning And Storage - ABSINA 52-230-1001 User Manual

• When the charging process is finished, you can
disconnect the vehicle charging plug and the charging
plug. Never pull them by force. Dangerous electric arcs
can cause death and serious injury.
• There are electric vehicles that allow the vehicle to be
started with the charging cable plugged in. Always make
sure that the charging cable is disconnected before
starting.
• Do not use the charger cable with an extension cable or
adapter. Modifications or alterations are life-threatening
and lead to the immediate exclusion of the warranty.
• If the plug connection smokes or melts, never touch the
charger cable. If possible, interrupt the charging
process. In any case, operate the emergency stop
switch on the charging station.
• Make sure that the charging cable is not accessible to
children. Only persons with a valid driving licence for
motor vehicles may operate the charger cable.
OPERATIONS
1. Switch off the vehicle.
2. Connect the mains plug of the charging cable to a
suitable socket (230V 16A).
3. The charging cable carries out a self-test in which all
the LEDs light up briefly.
4. The POWER LED lights up to indicate that the battery is
ready for charging.
5. Pull the protective cap off the charger plug.
6. Connect the charging plug of the charging cable to the
charging socket of your vehicle.
7. The charging process starts automatically as soon as
the CHARGE LED starts flashing green.
8. The charging process is completed when the CHARGE
LED is permanently lit up green.
9. When the charging process is finished, remove the
mains plug from the mains socket and then the
charging plug of the charging cable from the charging
socket of your vehicle.
10.Put the protective cap on the charging plug and roll up
the cable without kinks.

LOADING TIME

The duration of the charging process depends on the
capacity and state of charge of the high-voltage battery of
your vehicle and on the permissible charging capacity of
the charging cable and the mains socket. At very low and
very high temperatures the charging capacity can be
impaired.

CLEANING AND STORAGE

Only clean the charger cable if it is not connected to the
vehicle or the power socket. Only clean the charging cable
and dirty contacts with a dry cloth. Never use abrasive
cleaning agents, water or steam jet cleaners. Never
immerse the item in liquids.
Store the charger cable with the protective caps attached
in a dry and clean place.
Deutsch . English