Download Print this page

Flexsteel home Power Recliner with Power Headrest and Lumbar Manual

Download this manual

Power Recliner with Power Headrest and Lumbar

IMPORTANT NOTE

Read these instructions carefully, and familiarize yourself with

each procedure before assembling the furniture. Check that you

have all the component parts, and familiarize yourself with each

part before proceeding.

Take all the fittings out of the plastic bag and separate them into

groups. Ensure you have enough space to lay out all the parts

before assembly. To prevent damage to the parts, we recommend

that you assemble the unit on a soft, level surface.

Part List

A. Back Cushion

1 piece

B. Seat Cushion

1 piece

Assembly Instructions

STEP 1

Detach the transformer from the back of the Seat (B). (See Figure 1.)

Figure 1

Page 1 Power Recliner with Power Headrest and Lumbar IMPORTANT NOTE Read these instructions carefully, and familiarize yourself with each procedure before assembling the furniture. Check that you have all the component parts, and familiarize yourself with each part before proceeding. Take all the fittings out of the plastic bag and separate them into groups.
Page 2 Assembly Instructions STEP 2 Attach the Back (A) to the Seat (B). Ensure the latches fit well. (See Figure 2.) Figure 2 STEP 3 Flip up the back flaps, and remove the headrest and lumbar cables from the Backs (A). Plug the Lumbar and Headrest connecters (if applicable).