Power reclining loveseat with power headrests (2 pages)
Summary of Contents for Flexsteel home Nirvana 165062PH
Page 1
Flexsteel Power Recliner with Power Headrest IMPORTANT NOTE Read these instructions carefully, and familiarize yourself with each procedure before assembling the furniture. Check that you have all the component parts, and familiarize yourself with each part before proceeding. Take all the fittings out of the plastic bag and separate them into groups. Ensure you have enough space to lay out all the parts before assembly.
Page 2
Assembly Instructions STEP 1 Detach the wall plug transformer from the bottom of Seat (A). (See Figure 1.) and set it aside to be used in STEP 4. Figure 1 STEP 2 Attach the Back (B) to the Seat (A). Ensure the latches fit well. (See Figure 2.) Figure 2 STEP 3 Flip up the back flaps, and remove the headrest cables at the middle bottom from the Backs (B).
Page 3
STEP 4 Attach the power transformer cord found in STEP 1 to the matching Plug found at the bottom rear of The dual power recliner as seen below . Make sure to close the clip lock to prevent the connection from coming loose. See the Figure 4.) Figure 4 STEP 5...