Advertisement
Sl
Selecting the Front Speakers
Note:
When only one set of the front speakers is connected to either the FRONT SPEAKERS or @ terminals, do
not press in both SPEAKERS 1! and 2 buttons (ON). If you do, no sound comes out of the front speakers.
Adjusting the Volume
On the front panel:
To increase the volume, tum the MASTER VOLUME control clockwise.
To decrease the volume, turn it counterclockwise.
From the remote control:
To Increase the volume, press the VOLUME + button.
To decrease the volume, press the VOLUME - button.
On the front panel
CAUTION:
VOLUME +
Always set the MASTER VOLUME contro! to the minimum before starting any source. if the
=>
From the remote control
Adjusting the Front Speaker Output Balance
To decrease the feft channel sound, turn the BALANCE control clockwise.
To decrease the right channel sound, turn the BALANCE control counterclockwise.
When set to the CENTER position, no adjustment is applied.
Adjusting the Tone
eee
You can increase or decrease the amount of bass and treble reinforcement.
Adjusting the bass
To increase the bass reinforcement, turn the BASS contro! clockwise.
To decrease the bass reinforcement, turn the BASS control counterclockwise.
When set to the FLAT position, no bass reinforcement is applied.
To increase the treble reinforcement, turn the TREBLE control clockwise,
To decrease the treble reinforcement, turn the TREBLE control counterclockwise.
When set to the FLAT position, no treble reinforcement is applied.
Page 11
Listening at Low Volume (Loudness)
touoness
To use the loudness function, press the LOUDNESS button on the front panel.
The LOUDNESS indicator lights up on the display.
To turn the function off, press the LOUDNESS button again,
The LOUDNESS indicator goes off.
Muting the Sound
You can easily tum down the volume by pressing the FADE MUTE button on the remote control.
Fane
wai
To mute the sound through all speakers and headphones connected, press the FADE MUTE button
so
that the VOLUME contro! tums down.
To cancet the mute, press the VOLUME + button (or the VOLUME - button) on the remote control.
Recording a Source
Note:
The output volume level, tone adjustments, as well as surround effects cannot affect the recording.
Listening with Headphones
CAUTION:
Be sure to turn down the volume before connecting or putting on headphones, as high volume
can damage both the headphones and your hearing.
Page 12
MavA-XV
Advertisement
