Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nexelec Atmo Sense Aero
Summary of Contents for Nexelec Atmo Sense Aero
- Page 1 Atmo_Sense_Aero_Quick_start_guide_EN_v1.doc Quick Start Guide Atmo Sense Aero...
- Page 2 Atmo_Sense_Aero_Quick_start_guide_EN_v1.doc Where to install the product Recommended places The equipment should be placed in a location representative of average exposure. Ideally, the product should be placed in a central location in the room, between 50cm and 2m high. Try to place it away from draughty areas (doors, windows, etc.) and away from areas close to heat sources (radiators, direct sunlight, etc.).
- Page 3 Atmo_Sense_Aero_Quick_start_guide_EN_v1.doc To remove a product with an activated anti-theft system, use a screwdriver to continuously push on the tab and rotate the product. Push here with a screwdriver and turn the device. Installation of the mounting base Use the mounting base and the screws and plugs supplied with the detector. The product can also be mounted using the adhesive fasteners.
- Page 4 Atmo_Sense_Aero_Quick_start_guide_EN_v1.doc Follow the procedure below: Place the detector on a piece of furniture or a shelf within one meter of the floor to prevent damage if the detector is accidentally dropped. Place your mobile mounting cradle on the back of the detector, then turn it a quarter turn to the right to secure it.
- Page 5 The LED indicator can be configured to indicate the general air quality level calculated by the iZiAiR algorithm. This algorithm uses all available measurements (fine particles, CO2, volatile organic compounds, formaldehydes) to provide a global analysis. Setting up the product in NFC Refer to the specific documentation for the Nexelec Config Tool NFC mobile application.
Need help?
Do you have a question about the Atmo Sense Aero and is the answer not in the manual?
Questions and answers