Advertisement
Step 1: Place a flat blade screwdriver and pull up gently the diffusor's clips from both sides to remove the
diffusor.
Step 2: Install the pictogram you need in the diffusor and refit it to the luminary. (In case you need to
change the pictogram follow the same procedure.)
Step 3: Fill in, the letter G on the specification label.
Wall installation
Wall
bottom
view
ImperLED luminaries can be surface mounted on walls or ceilings.
Mounting Accessories (Available After Request)
290405.11 ImperLED Suspended Pictogram
Honeywell Life Safety AS, Postboks 236, 1372 Asker
Pictogram Installation
Mounting Methods
X
1 A A E
6 0
G
Ceiling installation
Ceiling
290471 ImperLED Wall Bracket
http://www.hls-nordic.com
GB
Advertisement
