Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BROOD DRNX SLM
Summary of Contents for BROOD DRNX SLM
- Page 1 DRNX SLM BY BROOD MANUAL V240205...
-
Page 2: Table Of Contents
CONTENTS SAFETY REGULATIONS GENERAL INFORMATION COMPONENTS INSTALLATION OPERATION ADJUSTABLE SETTINGS CARE TROUBLESHOOTING WARRANTY DECOMMISSIONING DRNX SLM BY BROOD... -
Page 3: Safety Regulations
STORING DRNX SLM If DRNX SLM is to remain inactive for a long time, turn it off and unplug it. Store it in a dry place, out of reach of children. Make sure the storage area is between 13°C and 40°C. Keep it protected from dust and dirt. -
Page 4: General Information
All spare parts must be obtained from your service provider. Follow the service and maintenance instructions in this operation manual. DRNX SLM pulls any filtered liquid from an unpressurized container. It chills the liquid to 2°C and infuses it with atmospheric nitrogen. -
Page 5: Components
5 – Inlet Connector 14 – Elbow Connectors 6 – Main ON/OFF Switch 15 – Pre-Filter 7 – Legs 16 – BROOD Beverage Container 8 – Forward Plate 17 – Inlet for Container 9 – Rear Plate 18 –Thermostat SPECIFICATIONS Width: 9.00in... -
Page 6: Installation
CAUTION: Beverage container must be DRNX SLM will pull from any container. If using a keg, then attach your beverage level with, or beneath the tube to a keg coupler. If using a bag-in box, then attach your beverage tube to a machine. -
Page 7: Operation
Make sure the pre-filter adapter is installed in the beverage tube. Ensure that the coffee is filtered with a fineness of at least 100 μm (microns). Not using the pre-filter risks damaging the internal components of DRNX SLM. DRNX SLM BY BROOD... -
Page 8: Adjustable Settings
This is a one-time calibration process to adjust the amount of infusion at the maximum position only. 1. Locate and remove the four screws in the back panel. 2. Locate the calibration knob. Turning clockwise will decrease the amount of nitro. 3. Return the back panel and screw it securely. DRNX SLM BY BROOD... -
Page 9: Care
10. BEFORE SERVING: Then run the remaining Place a glass under the tap. solution through the system. Pull the tap down until the water is flushed out and cold brew begins to flow freely, then close the tap. DRNX SLM BY BROOD... -
Page 10: Troubleshooting
Pause for a moment between pours. If pouring more than 1.5 litres (48oz.) continuously and without stopping, then it might be necessary to pause for a few minutes for the exhaust fan to turn off until pouring a subsequent drink. DRNX SLM BY BROOD... -
Page 11: Faq
Q. WHERE DO I PUT MY COLD BREW COFFEE OR TEA? A. DRNX SLM can pull cold brew from any container. DRNX SLM comes with a beverage tube that clips into the dispenser from underneath. The other end is loose so that an operator can drop it into any container. Alternatively, an operator can attach a keg coupler, bag-in-box adaptor, or an elbow fitting to the other end of the beverage tube in order to connect it to a keg, bag in-box, or BROOD container respectively. -
Page 12: Warranty
• Daily flushing of DRNX SLM as outlined in the operation manual is required. • Cleaning DRNX SLM consistently is crucial to the operation and lifespan. Any negligence in daily cleaning and upkeep of DRNX SLM will risk damaging the machine over time. The warranty period is 1 year. Please review our warranty terms and conditions. -
Page 13: Decommissioning
DECOMMISSIONING STORAGE Before placing DRNX SLM out of service for a period longer than 2 weeks, we recommend the weekly cleanse as per the instructions in the Care section. Store DRNX SLM in a dust-free environment between 13°C and 40°C.
Need help?
Do you have a question about the DRNX SLM and is the answer not in the manual?
Questions and answers