Advertisement
mel averd(elame) mO@xe)aiine) {3
POWER switch
Press to turn ON or OFF the unit.
To control the power of the unit with the power switch
(SYSTEM POWER) of the control amplifier, connect the
power cord of the unit to the switched AC outlet of the
control amplifier and usually set the POWER switch of
the unit to ON.
PEAK POWER METERs
Indicate the peak power levels of the LEFT and RIGHT
channels independently.
RANGE selector and indicator
Select the range of the PEAK POWER METERs:
x1: Peak power level is indicated by the scales (for use
when listening at the high volume level).
x1/10: Peak power level is indicated by 1/10 of the
scales (for use when listening at the low volume level).
SPEAKERS selector
Select the speaker system to be used.
A: To drive speaker system A.
B: To drive speaker system B.
A+B: To drive both speaker systems A and B.
OFF: For headphones listening only.
Notes
* Speaker systems A and B are series connected.
No sound can be heard if the SPEAKERS selector is
set to A+B when only one speaker system is
connected.
* The sound of the rear (surround) or DRLC (Dual Room
Link Control) speakers can be heard only when
surround mode or DRLC is selected on the control
amplifier or DRLC units.
HEADPHONES jack (stereo phone jack)
Connect headphones for listening the sound of front
speakers.
Notes
¢ After setting the volume level to minimum on the
control amplifier, connect headphones.
¢ The sound of rear and DRLC speakers cannot be
heard from headphones.
Advertisement
