Configuring The Scanner Button - Visioneer Strobe XP 100 Installation Manual

16 V S
ISIONEER TROBE
XP 100 S I
CANNER NSTALLATION
C
ONFIGURING THE
When you first connect your scanner to a computer, the scanner's
software configures the scanner button to scan in black and white for a
magazine article and send the scanned image to the PaperPort desktop.
But, you can change the button's settings by selecting new options from
the button's Configuration dialog box.
You display the Configuration dialog box from either the shortcut menu
or the Windows Start menu.
To display the Configuration dialog box:
1. Choose Programs from the Windows Start menu and then
ScanSoft PaperPort 8.0 and OneTouch Configure.
You can also just right-click the scanner icon at the bottom right
corner of the Windows desktop and then choose Configure from
the shortcut menu that appears.
Scanner icon
The Configuration dialog box appears.
2. Click the Scan tab on the Configuration dialog box if it is not
already selected.
G
UIDE
S B
CANNER UTTON