Visioneer OneTouch 9320 Installation Manual page 17

Note: The scanning lamp under the scanner's glass needs to warm up
before you can scan. A status message lets you know when the lamp is
ready. The lamp then remains ready so you don't have to wait each
time you want to scan. To conserve electricity and prolong the life of
the scanner, you can set the length of time for the lamp to remain lit
before powering down. See "Setting Preferences" on page 39.
To connect the scanner:
1. After checking for all the above problems, right-click the scanner
icon with the red X over it.
The shortcut menu appears.
2. Choose Connect from the shortcut menu.
The software finds the scanner and makes the connection. The
scanner icon will no longer have a red X through it, and you're
ready to begin scanning.
If you try all the troubleshooting procedures described above and in the
Readme file, and the scanner icon still has a red X through it, you may
have a malfunctioning scanner. Visit our Web site at www.visioneer.com
for additional technical information. You can also receive software
updates from the Web site.
S 3: C O Y
TEP HECK UT OUR
S 13
CANNER