Table of Contents
Advertisement
3. Drag the Gamma, Saturation, and Color Hue sliders to the left to
decrease the settings or to the right to increase the settings.
You can also type a number directly into the setting boxes, or click
the up and down arrows next to the boxes.
4. Click Reset to return the settings to their original numbers.
The upper Reset button is for the gamma setting, the lower one is
for saturation and hue.
5. To save the settings of a response curve, click Save.
Saving is available for settings created with the Curve or Freestyle
editing option so you can load and reuse the exact settings on other
images. This is especially helpful for complex Freestyle response
curves.
A dialog box appears that lists the names of previously saved
settings. Type a name for your new settings and click OK.
6. To reuse a saved response curve setting click Load.
A dialog box lists the names of your previously saved settings. Select
the one you want and click OK.
A
O
S
DJUSTING
UTPUT
The item you're scanning may not fill the scanner glass. In that case you
can preview the item and use the Auto Trim option to automatically
eliminate the unwanted sections of the image.
You can also adjust the output size to scan only specific sections of an
image. For example, if you're scanning a photograph and want to focus
on one section, adjusting the output size removes the rest of the
photograph from the final scanned image.
A
S
DJUSTING THE
ETTINGS ON THE
IZE
S
M
44
CAN
ANAGER
Advertisement
Table of Contents
