Bissell SPOTCLEAN PRO 1558E Manual page 7

Table of Contents

Advertisement

B-2 Filling the formula & water
tank
1. Remove tank from the back of the
machine by lifting up tank carry handle.
NOTE: This tank was designed with a flat
bottom so it can be easily filled.
2. Unscrew the black cap and remove bottle
insert.
3. Fill tank with hot tap water (140° F/60° C
MAX) to the water fill line. Add 60 mL of
BISSELL 2X formula to the tank.
4. Replace the bottle insert in the tank and
tighten the black cap. Replace the tank on
the portable machine.
B-3 Cleaning with your spot
cleaner
Important! Please check manufacturer's tag
before cleaning area rugs for any specialized
cleaning instructions. We do not recommend
deep cleaning delicate, silk, wool, antique or
area rugs without a manufacturer's tag.
1. Plug unit in and turn on by pressing power
button.
2. Hold cleaning tool approximately 2.5cm
above soiled surface. Press spray trigger to
apply cleaning solution to soiled area.
3. Using brush on cleaning tool, gently scrub
area to be cleaned.
4. For thorough cleaning, spray additional
solution while brush and suction are in
contact with surface.
5. Apply downward pressure on cleaning
tool and pull it toward you. The suction
will remove the dirt and cleaning solution.
Continue until no more dirt can be removed.
6. As a final step, use "drying strokes" (by
not pressing the spray trigger) to remove as
much liquid/moisture as possible. Repeat this
step as often as necessary.
6
www.BISSELL.com
B-4 Empty dirty tank
1. When the dirty tank reaches the "FULL" line
on the tank it is time to empty.
2. Remove dirty tank and carry to a utility
sink, toilet or outside (where you will dispose
of the dirty water).
3. To unlock the dirty tank lid, rotate handle
over the back of the tank. Remove lid and
pour out dirty water. Rinse out dirty tank to
remove any debris.
4. Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5. Before replacing tank on machine, wipe
debris from red filter.
Keep spray away from face. Failure to do so may
result in personal injury.
IMPORTANT
Check for colourfastness in an inconspicuous place. If possible,
check upholstery stuffing. Coloured stuffing may bleed through
fabric when it becomes wet.
ATTENTION
Some Berber carpets have a tendency to fuzz with wear.
Repeated strokes in the same area with an ordinary vacuum
or deep cleaner may aggravate this condition.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spotclean pro 1558 series

Table of Contents