Scanning By Pressing The Onetouch Buttons - Visioneer OneTouch 8600 Installation Manual

20 V O
ISIONEER NE
T 8600 S I
OUCH CANNER
• Scan from the PaperPort Software (or Other Twain Software)
To scan from the PaperPort software, start the software, and then
click the Twain icon on the PaperPort Command Bar. You can also
scan from other Twain software.
See "Scanning an Item with the Twain Button" on page 40 for
details.
S
CANNING BY
Pressing a scanner button scans the item, and then sends the image
either to the printer, or to a software application on your computer.
To scan by pressing a button on the scanner:
• Place an item to scan on the glass, face down, and press one of the
scanner buttons.
The scanner starts scanning the item. A message just above the
Windows taskbar shows the status of the scanning.
When scanning is complete, the status message also shows the
destination application. In the sample below, the scanned image
appears on the PaperPort Desktop.
G
NSTALLATION UIDE
P O
RESSING THE
T B
NE OUCH UTTONS