Visioneer OneTouch 8600 Installation Manual page 11

To connect the OneTouch scanner to a USB port:
1. Plug one end of the USB cable into an available USB port.
Some newer computers also have keyboards with USB ports.
You can plug the scanner into the keyboard instead of the USB port
on the computer.
2. Slide the latch on the back of the scanner to uncover its USB port.
3. Plug the other end of the USB cable into the scanner's USB port.
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
4. Plug the power adapter cable into the power jack on the back of the
scanner.
I USB P
NSTALLING TO A ORT
USB port
7