Introduction; Front View - VIORE LED24VF65D Operating Instructions Manual

Introduction

1. Front View

Remote Control window
1. (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red)
Indicator on(Green)
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 30
window.
2. The functions of the buttons:
MENU: Press to display the OSD menu,
press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
INPUT: Press to display the input source menu.
PLAY: Play/pause the DVD program.
EJECT: Eject the disc.
POWER: Turn on/standby the TV set.
Introduction
LED Indicator
Standby mode
Power on mode
0
to the left or right side and 20
Press INPUT button on the TV set or remote control to
display the input source menu, and use CH+/- button on
the TV set or
input source, press OK button on the remote control to
enter.
Note: Before you select the input source, make sure the
connections are prepared.
0
above or below the remote control
/ button on remote control to select the
5
Please insert a 12cm disc
by following this instruction.
INPUT SOURCE
TV
AV
Component
DVD
HDMI1
HDMI2
VGA