24" 1080p lcd television with built-in dvd player (23 pages)
Summary of Contents for VIORE LED19VH65D
Page 1
19" LED Backlight LCD Television with Built-in D VD Player LED19VH65D AIR (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air"...
2. Audio menu 3. Time menu 4. Setup menu 5. Lock menu 6. Channel menu 19-20 21-27 DVD Operations 21-24 DVD basic operation 25-26 DVD System Setup Disc Care Simple Troubleshooting Technical Specifications Instruction for Wall Mount VIORE Limited Warranty...
Calitioll Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the...
Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety ° The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor °...
Unit and Accessories and Product Feature Unit and Accessories TV set User's Manual User's manual Mains cable Remote control Mains adaptor Batteries: 2xAAA Product Feature • 19" (measured diagonally) wide screen for a complete home theater experience • Energy Saving TV - more natural colors and better picture quality than conventional LCD TVs with less power consumption •...
Introduction 2. Rear View >- I POWER Service HDMI2 HDMI1 PC-IN Coax Headphone 1). POWER: Connect to the mains adaptor. 2).Service : For software update only. 3).HDMII/2: Connect it to the HDMI of DVD or other equipment. 4).VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
Introduction 3. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. INPUT POWER Press to display the input source Press to turn the TV on/standby menu PICTURE...
Introduction Number buttons for DVD. Pressing "-/--"button to display "SELECT 10+", and press a number button to play the program. DISPLAY( In DVD) Press to display the current mode's information. LANGUAGE Select DVD disc language. ZOOM Adjust picture size in DVD mode. SUBTITLE Select DVD disc subtitle.
Connection Connection Power Cord Connection _llll I_ER Service HDMI2 HDMI1 PC-IN Coax Headphone - Connect to the power supply correctly as shown with the mains cable and mains adaptor• - When you connect the power, the TV set comes into standby mode and the LED indicator (Page 5) lights red.
Page 11
Connection AV Input Connection Note: All cables shown are not included with the TV. Video L-in R-in RCA Video Cable RCA Audio Cable _'-----_ _i otoo"_ DVD or VCR YPbPr Connection Note: All cables shown are not included with the TV. Video L-in R-in...
Connection HDMI Connection Note: All cables shown are not included with the TV. Service HDMI2 HDMI1 PC-IN Coax Headphone iiiiiiil_ HDMI cable DVDorVCR PC Connection Note: All cables shown are not included with the TV. HDMI1 PC-IN Coax Headphone [ Caudio If using a sound card, adjust the _Suppo_ed PC resolution_ PC sound as required.
Basic O_eration Basic Operation Power on/off 1. Connect to the power with a mains cable and an adaptor (page9). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control.
Page 14
Basic O_eration Basic OSD Menu operation Press MENU button to display the OSD menu as below: Use < / > button to select the main menu, and press V button to enter the submenu. In the submenu, use/k / V button to select the function item, and you could: adjust ("Contrast"...
OSD Menu OSD Menu 1. Picture menu Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture.
OSD Menu 2. Audio menu Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity.
OSD Menu 3. Time menu Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: User can not change time manually during DTV mode, for time is from signal source...
OSD Menu 4. Setup menu Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle.
OSD Menu 5. Lock menu You must enter the password to gain access to the Lock menu. The default password is 0000. You may modify the following options: Change password: Change the password, you must enter the new password twice to confirm it.
OSD Menu 6. Channel menu Air/Cable: Allow you to select antenna between Air and Cable. If you selet "Cable", the following items(Favorite, Show/Hide, Channel NO, Channel Label and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan. "k If you select "Cable"...
OSD Menu Show/Hide: Allow you to show or hide the channels. Use A / V button to highlight the desired item, then press OK button to show or hide the highlighted channel. > Channel No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel.
D VD Operations DVD basic operation Press the Power button on the TV or the remote control, then press the INPUT button to select DVD mode. Place a disc Insert a disc with the mirror side facing towards you. If the disc is double sided, place the title you want to play facing you.
Page 23
D VD Operations 4. According to the Direction Indicator on the menu, you can press Arrow buttons to highlight where you want to enter. 5. During Program Playback, if program button is repressed, the program order and the contents will be displayed on the screen, and the Program Playback will be stopped;...
Page 24
D VD Operations 2. While a disc is playing, press Repeat button once and the repeat banner appears to show current repeat mode. a) In CD, HD-CD, WMA or Digital Audio disc/JPEG sequence playback mode. Press Repeat button again to turn on repeat mode. Press the button again on the remote to turn to the next repeat mode. There are three repeat options: Off, Track Repeat and Disc Repeat.
Page 25
D VD Operations Subtitles 1. Compatible with DVD discs. 2. Press the Subtitle button on the remote once, and the subtitle info banner appears 3. When a DVD is recorded with subtitles, you can use the Subtitle feature to view the subtitles on-screen.
D VD Operations DVD System Setup System operation will define the setting of the set; these definitions will be stored until you change them again. General Steps of Setup Menu 1. Pause or Stop the player. Press SETUP on the remote control. The main menu will be shown as below.
Page 27
D VD Operations "0000". Using the/k / V button, move the highlight to "PASSWORD", press > the button and enter "0000". You will see the padlock symbol open. You may now change the RATING or put in a new password number.
D VD Operations Disc Care About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, "title". Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered...
Sim_le Troubleshootin_ Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance.
Technical S_ec_cations Technical Specifications 19 inch (diagonal) 250 cd/m 2 1000:1 1440x900 DC 12V 4.16A * Product specifications and appearance are subject to change without notice.
TV to fall, resulting in personal injury. VlORE is not liable for these kinds of incidents Do not mount your VIORE TV at more than a 15 degree tilt. Always use two people to mount the TV to a wall.
VIORE will repair or if repairs cannot be made, VIORE will replace this Product at no charge with the same, like or similar Product if the Product is defective as specified in this limited warranty during the limited warranty period. VIORE may use new or remanufactured parts or products to repair or replace the Product at its sole discretion.
Page 33
VIORE, Inc. 7801 Hayvenhurst Avenue, Van Nuys, California 91406 Printed in China...