Advertisement
Pitching
Take out inner
out inner
tent and lay it on the ground.
nd lay it on the ground
Secure the bottom corners of the
tent to the ground by inserting the
steel pegs
Folding
Take off the flysheet and remove the pegs from
the ground.
Press the button on the leg pole, the upper pole
section will slide into the bottom section. Do the
same for all 4 corners.
"click"
ck"
Pull the tent upright and slide the leg
poles outwards until you hear a click.
Cover the inner tent with fly sheet,
secure the fly to the leg pole with
hook and loop tapes and to the corners
with buckles.
Unbutton the buckles, loosen the webbing in bottom.
Do the same for all 4 corners.
Then fold the poles together and tie it up.
Close buckle
Locate the buckle at the bottom of
the pole and click together to secure.
To assemble the awning use the steel
poles and guy ropes provided. Pass the
pole spigots through the eyelets on each
corner of the door. Peg down with guy
ropes to secure the poles.
Open buckle
Advertisement
