Advertisement
Quick Links
Advertisement
Summary of Contents for Wanderer KALBARRI
- Page 1 KALBARRI INSTANT TENT 4 PERSON PLU:594794...
- Page 2 Inner Awning Pole Rear Roof Pole Awning Pole Rear Roof Pole Guy Rope Inner...
- Page 3 STEP 1 Ensure the ground is free from sharp objects, unfasten the inner tent and let it spread out on the ground freely, unfold the leg poles. STEP 2 Hold roof poles and gently lift the roof, knuckles will come outwards and the roof can now stand by itself temporarily.
- Page 4 STEP 4 Attach the rear roof pole to rear of roof by inserting the spigot into the hole on the knuckle. It is important to have the C clips hooked on the pole before the next step. Adjust the tent to desired angle and four leg poles stand evenly.
- Page 5 STEP 7 Peg down the remainder of fly. Using guy ropes provided peg out away from the tent to maximize stability. STEP 8 To assemble the awning use the steel poles and guy ropes provided. Pass the pole spigots through the eyelets on each corner of the door. Peg down with guy ropes to secure the poles.
- Page 6 Before using the tent for the first time, it is recommended to check all components have been included and you become familiar with the assembly of the tent by reading through the instructions first. •DO NOT set up near open flame. The fabric will burn if left in continuous contact with any flame source.
-
Page 7: Care And Maintenance
•When removing the pegs from the ground, never pull on the tent to remove. This may cause damage to either property or persons. Always pull on the peg itself. This tent is not designed to be a permanent or semi-permanent structure.