Summary of Contents for Grandinroad Merritt Accent Chair 177693
Page 1
Weekdays // 8am-8pm EST Do not tip this chair when seated. Saturday // 9:30am-6pm EST If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts. EMAIL This item is intended for indoor use only. service@grandinroad.com...
Page 2
PARTS Please con rm you have the necessary parts to complete the assembly. TOOLS COMPONENTS HARDWARE XChair Seat (1x) Flat Washer (8x) ALLEN WRENCH Rear Leg (2x) Locking Washer (8x) 1.800.491.4958 Front Leg (2x) Long Bolt (8x)
Page 3
ASSEMBLE Merrit Accent Chair FLIP With Help. chair upside down. Use zipper to carefully open the dust cover. Chair Seat (1x) Right Rear Leg (1x) Flat Washer (2x) Lorem ipsum Lock Washer (2x) Insert the Right Rear Leg into leg slot, as shown.
Page 4
ASSEMBLE Merrit Accent Chair Insert CHAIR the Left Rear Leg into leg slot, as ASSEMBLY shown. Attach leg using two each of the Long Bolts, Flat Washers and Lock Washers. NOTE: Do not Over-tighten. Left Rear Leg (1x) Front Leg (1x) Flat Washer (4x) Insert one Front Leg into leg slot, as...
Page 5
ASSEMBLE Merrit Accent Chair Insert the other Front Leg into leg slot, as shown. Attach leg using two each of the CHAIR Long Bolts, Flat Washers and Lock ASSEMBLY Washers. NOTE: Do not Over-tighten. Front Leg (1x) Flat Washer (2x) Lock Washer (2x) up the dust cover.
Need help?
Do you have a question about the Merritt Accent Chair 177693 and is the answer not in the manual?
Questions and answers