Advertisement
Tracks are selected for both sides of the tape.
1
During stop mode, press EDIT once.
@ "COMPU"
and then "MAG?"
(magazine} appears on the
display
2
Prose. MAGAZINE
which contains the disc to be
programmed.
@ "DISC ?° appears on the display
@ Vhen
the single-disc magazine
is selected, "TIME ?* appears
on the display.
3
Select the disc No. with the DISC number button.
e@ "TIME ?' appears on the display.
4
Enter the
tape "ia
time in minutes with digit
@ COMPU PGM
@ © TIME FADE
buttons { [
Press the 10's
digit button and 1's digit button sequentially.
(To
enter 9 minutes or less, pres
ndthen the pitas
digi
button.)
For example, to enter 54 minutes, press (5) and [4 Bi
sequentially.
The displayed time is memorized.
The player now programs
the tracks for the first side of the tape within half the selected
playing time, programs a pause, and then programs the tracks
for the second side of the tape within half the selected playing
time. After the programming is completed, the display shows
all of the programmed tracks and their playing tirne in the
programmed order.
Example: The tape playing time 54 minutes is selected
e@ The programmed contents are displayed in the programmed
order.
3
)
Cees
ees
Les | oes | es)
®
instead of the digit buttons, Ke <4 of BR BPI can be used to
select the tape playing time. Each time b® titis pressed, the
tire will be changed in the follawing sequence:
Disc 4 Ise: § DISCS
be sure to press EDIT. About 3 seconds have passed since he<
i
J
J
<< of >
PPI is pressed, the time is automatically entered
NOTES:
@
Up to 24 steps can be programmed
@
With discs containing 24 tracks or more, programming may
not be correctly performed.
@
ifthe selected time is too short for any track to be programmed,
programming cannot be performed.
@ ifyou wish to enter the time with the digit buttons after the time
is alread entered with Hed <i of ge wii in step 4, press
i
lelQl The digit buttons can now be operated
4
,
e
Compu program editing can be carried out on ene disc only.
}
e@ The contents of the Compu program edit is not cleared even
when the power is turned off.
@
When the program procedure {or delete program procedure}
has been performed, Compu program editing cannot be carried
out,
TIME
?
"6.86066
©. ©. S. ©. ©.
GESEGEEGE,
EY
Co
19
<PRB1188>
En
Advertisement
