Download Print this page

Pioneer PD-TM3 Operating Instructions Manual page 11

Multi-play compact disc player

Advertisement

t
TIMER switch
3 A®
So
STANDBY/ON
me
@®: PAUSE 1
L« |
77]
®: STOP #
L= |
a
))
[I
»
Operations indicated by the iD ] mark are performed with the
remote control unit.
To piay a compact disc
1
Turn on the power to the player.
@ Be sure to set the TIMER switch to the OFF position.
2
Insert a magazine, pushing it in until a click
sound is heard.
e When
the power
is turned off, inserting a magazine
automatically turns on the power (Auto Power On function}.
3
Press » to start playback.
® To pause playback temporarily:
Press it, The af indicator lights and playback is paused at that point.
Pressing fi again or ® resumes playback from the position where
pause mode was entered.
To stop playback:
Press @.
NOTE:
This unit automatically adjusts the circuit according to each disc to
obtain the optimal signal.
Adjusting signal is sometimes heard from the unit.
To take out the magazine
Press 4, remove the magazine, and then press POWER to turn off
the power.
@ When
& is pressed even in power off (standby) mode, the
magazine is ejected (Power Down Eject function).
Cautions regarding handling of magazines
@ When inserting a magazine into the player, make sure that the
direction of insertion is correct.
e
After use, store in the case provided. Do not place in locations
subject to high temperatures or exposed to direct sunlight.
e@ Do not take magazines apart
e@ Be careful not to drop, or hit magazines against things. Also do
not apply strong force to trays which have been withdrawn
@
Application of benzene,
thinner, insecticide or other volatile
liquids to a magazine
may
damage
the surface,
so keep
magazines away frorn such substances
CAUTION:
Do not unplug the power cord or tu off the power with an audio
timer during playback, as this could result in damage to the disc.
Al
<PRBt188>
En

Advertisement

loading