Table of Contents
Advertisement
OPERATING INSTRUCTIONS
As there is manufacturing residue or oil remaining in the toaster
and on the heat element, it usually emits a 'new' odour when first
used. This is normal and will not occur after the first few uses.
NOTE: Before toasting the first slice of bread, it is strongly
suggested to operate the appliance following below instructions,
except without bread.
1.
Make sure the crumb tray is positioned in place and ensure the
power plug is in the outlet and is switched on.
2.
Place the sliced bread into the bread slots.
3.
Adjust the browning control to the desired setting.
4.
Depress the bread carriage lever. The toaster will begin
toasting the bread and the cancel button will illuminate.
5.
When completed, the bread carriage lever will automatically
rise and lift the toast from the toaster.
NOTE: The carriage handle will only depress when the appliance
is connected to the power supply.
6.
During the toasting process, you can cancel it at any time by
pressing the cancel button.
7.
To toast frozen bread, do not adjust the browning control from
your normal setting. Place the frozen bread in the bread slots,
depress the bread carriage lever and press the defrost button.
The button will illuminate and the toaster will operate for a longer
period defrosting and toasting the bread.
8.
If you want to reheat bread that was previously toasted but
gone cold. Press the bread carriage lever down vertically until
it is positioned in place, then press reheat button. The reheat
button will be illuminated and the toaster will operate for a short
period reheating the bread.
6
Advertisement
Table of Contents
