Panasonic FP-7742 Operating Manual page 36

User Preset
@ User Preset modes can change the initial copy mode, if necessary.
(See P.40, 41)
User presel mode User presel mode
select item select ilem
1 Paper size 1 Margin reduction default 100% [ — ]
2 Paper size priority 2 Sorler mode defaul Nonson[ ]
Sets the paper size of each paper drawer
(Ledger, Legal, Letter, Letter A or Invoice
size).
Specifies the paper size of most frequent Letter
usage.
1/4 3. Margin value default Selects the margin shift value 10 mm
(5 mm, 10 mm, 15 mm or 20 mm).
4. Edge value default Selects the edge width
(5 mm, 10 mm, 15 mm or 20 mm).
1. Paper size
2. Paper size priority
Selects the book void width
(15 mm, 20 mm, 25 mm or 30 mm).
5. Book value default
Selects the reduction ratio in margin mode
(95%, 93%, 91% or 100%).
1. Margin reduction
default
2. Sorner mode default Determines the mos! frequent usage mode | Nonsort
(non sort, sort, staple sort or group).
Determines most frequent usage mode,
(O =» [2], [2] => [2], book = [2] or No).
4.2 in 1 Copy ratio Selects whether to copy full size or Reduction
reduclion in the 2 in 1 mode.
5. Auto Edge default Selects whether or not to disable Auto
Edge Deletion*.
NOTE * Auto Edge Deletion
To copy from the platen with the original cover or i-ADF open. Normally, this makes a
copy with a solid (black) area around the original if the original is smaller than the
copy paper. This mode eliminates the solid area automatically.
3. Duplex mode default
[1] = [27750
No/7742
® litem numbers (1, 2, 3, 4, 5) and (Reserved) are not indicated on the display.
36