Hob Control Unit - Beko HII64400SMT User Manual

• Some cooking pots/pans have a base
that contains non-ferromagnetic materi-
als such as aluminium. These types of
cooking pots/pans may not heat ad-
equately or may not be detected by the
induction hob at all. In some cases, a bad
pots/pans warning may appear.
Recommended cooking pots/pans sizes
Cooking zone diameter - mm
145
180
210
240
280
320
Cooking zone with wide (flexi) surface
The detection of cooking pots/pans by the
induction hobs depend on the diameter and
material of the ferromagnetic in the base of
the pots/pans. To ensure detection of the
cooking pots/pans and achieve an efficient
cooking, the cooking pots/pans shall be se-
lected as per the size of your hob. The
cooking pots/pans sizes recommended for
hob sizes are given above.

5.2 Hob control unit

Keys :
On/Off key
Equal distribution of the cookware
on the right and left and center
hobs for the selection of hobs af-
fects the cooking performance pos-
itively while cooking multiple meals
on the induction hobs.
Cooking pots/pans test
Test whether your pot is compatible with
cooking with an induction hob using the
methods below.
1. It is compatible if the base of your pot
holds a magnet.
2. It is compatible if
when you place your pot on the induc-
tion hob and turn on the hob.
Pot diameter - mm
min. 100 - max. 145
min. 100 - max. 180
min. 140 - max. 210
min. 140 - max. 240
min. 125 - max. 280
min. 125 - max. 320
width 230 - length 390
Boiling behavior may vary depending on the
pot types, size of the pot and size of the
cooking zone. For a more homogenous
boiling behavior, a one step larger cooking
zone might be used. To use a larger cook-
ing zone does not cause wasting of energy
at induction hobs, because the heat is only
created in the relevant pot area.
Timer key
Increase key
Decrease key
Symbols :
Key lock symbol
Cooking zone selection keys :
Rear left cooking zone selection key
Front left cooking zone selection key
EN / 14
does not flash
EN
PL
CS
SK