Flex FX0511 Operator's Manual page 7

Symbol
SYMBOLS (CERTIFICATION INFORMATION)
Symbol
SAVE THESE INSTRUCTIONS AND MAKE THEM AVAILABLE TO OTHER USERS
OF THIS TOOL.
Name
Wear eye protection symbol
Always operate with two hands
Do not use the guard for cut-off
operations
No-Hands Zone
Warning symbol
Designation/Explanation
This symbol designates that this tool is listed by Underwriters Laboratories.
This symbol designates that this component is recognized by Underwriters
Laboratories.
This symbol designates that this tool is listed by Underwriters Laboratories, to
United States and Canadian Standards.
This symbol designates that this tool is listed by the Canadian Standards
Association.
This symbol designates that this tool is listed by the Canadian Standards
Association, to United States and Canadian Standards.
This symbol designates that this tool is listed by the Intertek Testing Services,
to United States and Canadian Standards.
Designation/Explanation
Alerts user to wear eye protection
Alerts user to always operate with two
hands
Do not use the guard for cut-off operations
The area between the marked lines on the left
and right side of the base. This zone is
identified by the No-Hands Zone symbols
inside the lines marked on the base.
Do not stare at operating lamp
-7-