Safety Instructions - Klarstein WONDERBEAM Manual

EN
18

SAFETY INSTRUCTIONS

• Read the user manual before using the heater. Keep the user manual and
make sure it stays with the heater if you pass it on to a new owner.
• Before use, make sure that the heater and the supplied accessories are
complete and undamaged.
• The heater must be installed according to the instructions in the installation
manual. The power plug must be connected to an outlet that meets the
following requirements: AC230V, frequency 50/60 Hz.
• The heater is only suitable for indoor use. Do not use it outdoors.
• Do not leave the heater unattended during operation. Keep the heater away
from children: risk of burns.
• Do not use external control with the heater. The heater should not be set to
turn on when left unattended.
• Do not use the heater near flammable or explosive materials: risk of fire or
explosion.
• Strictly avoid inserting objects into the heater's protective grille: risk of electric
shock.
• Do not touch the metal housing as it gets hot when the heater is in operation:
risk of burns. Allow the heater to cool before turning off and storing.
• Pull the plug out of the socket if you do not intend to use the device for a long
period of time.
• Before each use of the electric heater, make sure that it is in good condition
and intact. Do not plug in the heater if the housing, cable or power plug is
damaged.
• The heating element can be damaged if dropped or hit. Before each use,
make sure the heating element is not damaged. Do not use the heater if the
heating element is defective.
• Unplug the power cord from the outlet when moving or cleaning the heater.
To do this, first turn off the switch, and then unplug the power cord. Do not
pull on the cable.
• It is strictly forbidden to dismantle the electric heater without authorisation. If
the heater is damaged, contact professional service personnel.
• The device is intended for household use only.
• Do not touch the surface of the device with bare skin during use: risk of burns.
• Do not share the heater socket with other devices: risk of fire due to
overloading.
CAUTION
Fire hazard
Never cover the heater. If you cover the device, there is a risk
of overheating and fire. The heater must not be placed directly
under a power socket.
• If the power cord is damaged, it must be replaced by the manufacturer, its
after-sales service or a similarly qualified person in order to avoid any hazards
• Avoid using an extension cord as it can overheat and pose a fire hazard.
• This heater is not intended for use in bathrooms, laundry rooms or similar