HOW TO DRAW THE PERFECT GLASS OF BEER
1. Start with a clean beer glass that has been
wetted in cold water. Place the glass at a
45
o
angle, one inch below the faucet. Do
not let the glass touch the faucet. . Open
the faucet all the way.
3. Let the remaining beer run straight down
the middle. This insures proper release of
CO 2 by producing a 3/4" to 1" foam
head.
2. After the glass has reached half full,
4. Close the faucet completely and
12
gradually bring the glass to an
upright position.
quickly.