Lindy 43392 User Manual page 3

User Manual
•
Power requirements: 15W
•
Compatibility: USB Type C or Thunderbolt 3/4 equipped computers with DisplayPort Alternate Mode
support; Windows, macOS, Linux, Android, ChromeOS
•
Special Features: DisplayPort Alternate Mode, MST Extended display support for Windows, Battery
Charging 1.2 (only USB 3.2 Gen 2 Type C port), supports simultaneous card reading, PXE (Preboot
Execution Environment) and Wake on LAN (WOL), supports MAC Address Pass-through (this
feature is dependent upon the compatibility of the hardware used in each set up)
Overview & Installation
Plug the USB Type C cable of the Docking Station into a free USB port of the laptop.
Please Note: The Type C source connected must support DisplayPort Alternate mode. If the host
computer supports USB Power Delivery, it can also be powered/charged through a connected power
supply with up to 85W (the Docking Station needs 15W for its operation).
•
Audio: 3.5mm stereo input/output to connect a headphone, speakers or a microphone
•
LAN: Connect to a network LAN using a Cat.5e (or above) cable.
•
SD/MicroSD: Card reader for SD and microSD cards
•
5Gbps: Connect USB Type C devices (support up to 5Gbps)
•
10Gbps: Connect USB Type C or Type A devices (support up to 10Gbps)
•
HDMI: Connect an HDMI monitor using an HDMI Male to Male cable.
•
DP: Connect a DisplayPort monitor using a DisplayPort Male to Male cable.
•
PD 3.0: Connect a Type C PD power supply (i.e. of your laptop or tablet) to provide power to your
host computer.
Next connect the display(s) using HDMI and/or DisplayPort cables as required. For multi-monitor
installations we strongly recommend using identical monitors to ensure the best compatibility and
performance.
Additional devices and peripherals can then be connected to the Docking Station as required.
This Docking Station also supports USB Power Delivery 3.0 up to 100W for charging the connected
laptop. A USB Type C power supply is not included. The dock can be used with the power supply
supplied with the laptop or a power supply can be purchased separately.
To use the "MAC address pass-through" feature, the setting must be enabled in the BIOS. The location of
the setting varies for each manufacturer. Change the setting to Enabled, then exit the BIOS while saving
changes to the BIOS setting.
Lindy regularly checks and tests our product range to ensure maximum compatibility and performance.
For the most up to date version of this manual, please refer to your local Lindy website, search for the
relevant part number and find the manual under Downloads.
English