•
Lowest Recommended Impedance is
bridged mono
•
Only the Right RCA input is used
•
Right Phase switch set to 0® (page 12)
•
Left Phase switch set to "MONO BRIDGED" (page 12)
\
•
Right Gain control sets the level for the amplifier output
•
Output can be configured for high-pass, low-pass, band-pass or full range operation (page 14)
•
Output is configured mono bridged which is ideal for separate left or right channel subwoofer applications
TUNING NOTE: In the "MONO BRIDGED" configuration, the Right Phase control can be used to change the phase of the
amplifier output. The right phase switches can be Individually switched for improved sound quality. Try
different phase switch positions for best sonic results. The high-pass crossover can be used as a subsonic
filter with INTELLi Q (page 18). Configure the high-pass crossover for "LOW" frequency range operation
and set according to instructions explained in the "High-pass Crossover Configuration" section in this
manual (page 16).