Panasonic SA-HE70 Operating Instructions Manual page 12

RQT6193
Control guide
For selecting the SFC mode
Help/reset button [-HELP, -RESET]
Press if an error message appears. A message offering a possible
solution scrolls across the display.
To reinitiate the unit's settings, press and hold until "RESET" appears.
Standby/on button [POWER, 0/1]
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of power.
Speaker on/off button [SPEAKERS]
Turning the speakers off automatically engages the STEREO mode
(when listening through headphones, for example).
~HELP B - BAND
- RESET f - FM MODE l| MEMORY
iQ M4) SU
TUNING
bv i^g EU
Ph s
Headphone jack [PHONES]
Plug type: 6.3 mm (1/4") stereo
Avoid listening for prolonged periods of time to prevent hearing
damage.
Tuning buttons [TUNING, V, A]
For tuning the radio and selecting preset stations.
Press and hold until the frequency starts scrolling to start automatic
tuning. Tuning stops when a station is found.
Tuning intervals: FM—0.2 MHz, AM-10 kHz
Preset channel button [PRESET]
Press to allow preset station selection with [TUNING, V, ^].
DSP sound mode select button [DSP SOUND MODE]
For selecting "STEREO", "SURROUND" or "SFC"
Dolby Pro Logic II mode select button
[DOLBY PRO LOGIC II]
Use when "DO PRO LOGIC 1" lights in the SURROUND mode.
The display
Frequency unit indicators (kHz, MHz]
kHz: AM, MHz: FM
General display
Shows the input mode, radio frequency, and other general
information.
NA NI MA NIA NIZA INE NA NA LL LE JLR ]
VIN VIN UNI NI VIN VIN VM VIV ne (SR ILFE] ,
E TUNED SOUND MODE FIX DOPRO LOGIC T
Speaker indicator [SPEAKERS] & ec cell mono STEREO SURROUND PCM
Lights when the speakers are on. STEREO SFC Em e OCO DIGITAL j
Radio indicators [TUNED, MONO, STEREO, MJ
TUNED: A station is tuned.
MONO: You have switched to monaural mode with [-BAND, -FM DSP sound mode indicators
MODE] to improve reception. [SOUND MODE, STEREO, SURROUND, SFC]
STEREO: A stereo FM broadcast is tuned. Show the current OSP sound mode.
M: Lights during presetting.