Klarstein ATHENA Manual page 27

Installation (Vent inside)
If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one show in section "Installation (Vent outside)".
Installing the Carbon Filter
Note: An activated carbon filter (item number 10032842) is not included. But
you can buy it as an extractor hood.
1
Activated carbon filter can be used to
trap odours.
2
In order to install the activated
carbon filter, the grease filter should
be detached first. Press the lock and
pull it downward.
3
Plug the activated carbon filter into
the unit and turn it in clockwise
direction. Repeat the same on the
other side. Make sure the filter is
securely locked. Otherwise, it would
loosen and cause dangerous. When
activated carbon filter attached, the
suction power will be lower.
EN
27