Bosch Professional GAS 18V-12 MC Original Instructions Manual page 25

automatically if it is connected to a power tool via Auto-Start
Remote GCT ....
To switch off the dust extractor, turn the on/off switch (14)
to position 0.
Status indicators
Status bar Auto-Start function
indicator
Green –
Green Green
Yellow –
Yellow Yellow
Yellow –
Red –
Slowly flashing blue Slowly flashing blue
Rapidly flashing blue 1× flashing blue
Illuminated blue (2 s) Illuminated blue (2 s) –
Slowly flashing blue –
Rapidly flashing blue –
Illuminated blue (3 s) –
4× flashing blue (in- –
terval of 1.5 s)
A)
The Auto-Start function indicator (4) only lights up if the on/off switch (14) is in the
Establishing a Connection to the Auto-Start Remote
(see figure J)
To be able to use the Auto-Start function, the dust extractor
must be connected via Bluetooth® to an Auto-Start
Remote GCT ... (39).
For this, the dust extractor and the Auto-Start Remote must
be located in the immediate vicinity of one another.
If the on/off switch (14) of the dust extractor is turned to the
position, the dust extractor automatically begins search-
ing for an Auto-Start Remote GCT .... The statusbar (2) and
the Auto-Start function indicator (4) slowly flash blue.
Reconnection to a known Auto-Start Remote:
If the dust extractor has already been connected to an Auto-
Bosch Power Tools
User interface
The user interface (6) is used as follows:
– As a status indicator for the dust extractor
– For establishing a connection to an Auto-Start
Remote GCT ... (39)
– For establishing a connection to a mobile device
Air flow alarm indic- Meaning
A)
ator
– Dust extractor is switched on and ready to use.
– Dust extractor is ready to use and connected to an
Auto-Start Remote.
– Battery almost empty
– No Auto-Start Remote found
Flashing yellow + ad- Air Flow Alarm
ditional audio signal
– Rechargeable battery empty or temperature alarm for
dust extractor or rechargeable battery
– Connection to the Auto-Start Remote is automatically
being re-established, following a switch-on of the
Auto-Start function.
– Connection to the Auto-Start Remote is being sought
and newly established.
Connection to the Auto-Start Remote has been suc-
cessfully established
– Connection to the mobile device is automatically be-
ing re-established or data transfer from the mobile
device is taking place.
– Connection to the mobile device is being sought and
newly established.
– Connection to the mobile device has been success-
fully established
– Reset is being initiated.
Start Remote GCT ... and this Auto-Start Remote is func-
tional and within range, the connection to this Auto-Start Re-
mote is automatically re-established.
Establishment of a new connection (first-time connection
or connection to another Auto-Start Remote):
– Press and hold the pairing button (5) on the dust ex-
tractor until the statusbar (2) begins rapidly flashing blue.
– Then promptly press and hold the start/stop button (41)
on the Auto-Start Remote (39) until the status
indicator (40) on the Auto-Start Remote flashes blue
twice.
position.
1 609 92A 5N0 | (26.09.2023)
English | 25